GAS .. LUST ..

[K9 Kai Niggemann]

James,

That's really awesome, I totally missed that you were so into synth repair and DIY. 

One thing I'm wondering is how do you test components without de soldering them? Do you have a ELI5 tutorial you can point me to? (ELI6 would work too...;-)

Awesome, please keep us posted about that restoration project (show some pix, plz!)

Kai


Sent from my phone

On 03.07.2015, at 00:28, James Coplin <james at ticalun.net> wrote:

> Dead negative rail probably caused by a failing tantalum. Took a bunch of stuff with it. Luckily all pretty run of the mill stuff and mostly in the last board with the amp, vca, reverb etc. it still needs a bunch of updating, mods, and TLC but that's mainly time at this point.
> 
> It came missing all of the knobs so that's going to be an aftermarket purchase and almost half the sliders are broken off. I could buy a replacement set but so far every one I've pulled apart and run through the ultrasonic cleaner has felt and sounded great. I'm thinking of having shafts 3d printed rather than swapping out the pots.
> 
> James R Coplin
> 
> On Thursday, July 2, 2015, random variate <randomvariate at hotmail.co.uk> wrote:
>> Nice work. I'm only jealous 😊
>> 
>> I'm currently working on a Waldorf MW2, but suspect I have a problem in the digital domain. I replaced the 32.768khz crystal to no avail. So I'm about to recap it. I may have to swap out the SM microcontroller :(
>> 
>> What was wrong with the non functioning  2600?
>> 
>> Tim
>> From: James Coplin
>> Sent: ‎02/‎07/‎2015 22:33
>> To: Music-bar
>> Subject: Re: GAS .. LUST ..
>> 
>> They are both opened up and on the bench at the moment. The one I just got was 100% dead. I got it back up and squawking after a long weekend. My other one is in fantastic condition and I had Phil at CMS go through it. So, I've opened up my old one to see his mods to repeat the procedure on the new one.
>> 
>> James
>> 
>> On Thursday, July 2, 2015, random variate <randomvariate at hotmail.co.uk> wrote:
>> Two ARP 2600s?!
>> 
>> Gratuitous synth pron
>> From: punkdISCO
>> Sent: ‎02/‎07/‎2015 21:47
>> To: Music-bar
>> Subject: RE: GAS .. LUST ..
>> 
>> Second!!!?  That's just greedy!
>> 
>> :)
>> 
>> Paul
>> London
>> www.punkdisco.co.uk
>> From: James Coplin
>> Sent: ‎02/‎07/‎2015 21:44
>> To: Music-bar
>> Subject: Re: GAS .. LUST ..
>> 
>> I'm really hoping it hits the streets soon. I just scored a second Arp 2600 and I'm dying to use it to drive them both at the same time.  
>> 
>> James
>> 
>> On Thursday, July 2, 2015, ibi sum <ibisum at gmail.com> wrote:
>>         .. or .. ?
>> 
>> 
>> Arturia BeatStep Pro Sequencer & Controller Demo
>> 
>> SQUARP Pyramid looks pretty good too .. might be time soon to retire the ol’ QY700, sheesh ..
>> 
>> j.
>> 
>> ;
>> --
>> Jay Vaughan
>> ibisum at gmail.com
>> http://ibisum.ddns.net/
> _______________________________________________
> music-bar mailing list
> music-bar at lists.music-bar.org
> http://lists.music-bar.org/cgi-bin/mailman/listinfo/music-bar
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.music-bar.org/pipermail/music-bar/attachments/20150703/54bbc2ae/attachment.html>