Filter Signature Project

[Marc Nostromo [M-.-n]]

Thanks a Lot. I think this is plenty enough. I might need a bit of time to
grab them since I'm in holiday right now but huge thanks !

/M

2012/6/3 ToAd <tom.adam at thebigear.be>

> On 29/05/2012 8:40, Marc Nostromo [M-.-n] wrote:
>
>>
>> Yeah I d love to ! Same goes for the others that proposed :)
>>
>>
>>>  Marc,
>
> Uploading now.
> Here's the URL's:
>
> www.thebigear.be/SDIY/ARPLPF.**wav<http://www.thebigear.be/SDIY/ARPLPF.wav>
> This is an ARP LPF clone, basically something like this:
> http://www.amsynths.co.uk/**Filter_Bank/AM8023/am8023.html<http://www.amsynths.co.uk/Filter_Bank/AM8023/am8023.html>
> Output is rather soft, compared to the other tracks. (I kept the record
> level the same for all filters) I'm not sure if this is the same on the
> original ARP filter... Second best LP filter in my rig.
>
> www.thebigear.be/SDIY/LPG.wav
> Buchla stuff: http://www.naturalrhythmmusic.**com/lopass.html<http://www.naturalrhythmmusic.com/lopass.html>
> This is made with a vactrol and a PCB from the source above.
> Weird little bugger.
>
> www.thebigear.be/SDIY/LPG2.wav
> My version of it, with a DIY vactrol and different cap's for the core.
> Deep switch needs to be activated here to get is oscillating.
>
> www.thebigear.be/SDIY/MOTM420-**1.wav<http://www.thebigear.be/SDIY/MOTM420-1.wav>
> MOTM filter MS20 clone in LP mode.
>
> And take 2 of the same filter...
> www.thebigear.be/SDIY/MOTM420.**wav<http://www.thebigear.be/SDIY/MOTM420.wav>
>
> www.thebigear.be/SDIY/**MOTM440a.wav<http://www.thebigear.be/SDIY/MOTM440a.wav>
> www.thebigear.be/SDIY/**MOTM440b.wav<http://www.thebigear.be/SDIY/MOTM440b.wav>
> I've got 2 of these now, THE LP filter I use all the time. Best filter
> ever!
>
> www.thebigear.be/SDIY/**OakleyJourneyman.wav<http://www.thebigear.be/SDIY/OakleyJourneyman.wav>
> Oakley filter I also love.
>
> Gotto go now, I can still do a couple of others, but not sure if those
> will be interesting:
> Oakley Variable state filter
> Oakley Croglin
> Oakley COTA
> Tellun CEM VCF (variable state) calibrated not to oscillate, but this can
> be changed with a trimmer on the PCB.
>
> One remark though, I still need to calibrate my synth for summer. Will do
> that soon... But this shouldn't influence the results much.
>
> Let me know when you downloaded them, I will delete them afterwards. You
> can do with the sample whatever you want.
>
> HTH,
> Cheers,
> ToAd
>
> ______________________________**_________________
> music-bar mailing list
> music-bar at lists.music-bar.org
> http://lists.music-bar.org/**cgi-bin/mailman/listinfo/**music-bar<http://lists.music-bar.org/cgi-bin/mailman/listinfo/music-bar>
>



-- 
http://marc-nostromo.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.music-bar.org/pipermail/music-bar/attachments/20120603/33d065f6/attachment.html>