Monowave

[Paul Maddox]

Tom,

   Give me a shout if you get stuck, I'll do my best to help.

Paul

On 20 Jul 2009, at 12:44, Tom Adam wrote:

> That reminds me that I've got a finished Monowave PCB I got from  
> Elby a
> couple of years ago.
> Unfortunately, it's not working. It's got several issues; pitch  
> tracking
> (although CV's are good) and VCF problem.
>
> I remember when I started debugging it, Laurie (Elby) asked me to  
> reburn the
> pic and AVR's. Apparently there was a software issue, but that  
> didn't solve
> all the problems. Then I got a second mail telling me that the PCB  
> was no
> good, the off board connections were screwed up. So I checked all  
> the traces
> according to his schematics. I didn't find any mistakes. Later on  
> Elby just
> stopped answering my mails, so the pcb was put aside.
> It's a shame as I really liked the samples too.
> I'll put it back on my workbench for one last try...
>
> I'll never deal with Elby again!
>
> Cheers,
> Toad.
>
>
> _______________________________________________
> music-bar mailing list
> music-bar at lists.music-bar.org
> http://lists.music-bar.org/cgi-bin/mailman/listinfo/music-bar