Digital Junk Out, Real Iron In...

[Matt Picone]

Cleaned out lots of drawers, sold lots of unused gear, and ordered one 
of these, which, despite my slower pace of use with new kids, won't 
depreciate on me nearly as fast!

http://www.greatriverelectronics.com/product.cfm?ID=23

*Preamp:*

    * Multiple In/Out connections: XLR balanced; ¼" -10dbV output for
      'no-latency' DAW monitoring; high-Z input on front panel
      (disconnects mic input): TRS ¼” insert patch point for compressor
      or equalizer ahead of the output amplifier
    * Adjustable gain stages: input in 5db steps to 60db; output from
      -25 to +10db; maximum overall gain 70db; 2 to 3 stages of single
      ended solid state amplifier gain blocks, depending on gain
      structure; high-current 70ma Class A bias on output stage
    * Input and output meters on each channel (dual-stage metering is a
      Great River exclusive)
    * Front panel switches: polarity; phantom power; input impedance
      (1200 / 300 ohm); output loading (600 ohm resistor across output
      transformer)
    * High quality, custom wound Sowter transformers
    * Gold plated switching contacts
    * Local power supply regulation on each channel

*EQ*

    * One channel, discrete Class-A design
    * Multiple In/Out connections: XLR balanced line in and out; ¼"
      -10dbV output for 'no-latency' DAW monitoring; TRS ¼” insert patch
      point for NV Series mic preamp (inserts EQ between NV preamp gain
      stages)
    * Wide range of input sensitivity from +8dbm to -20dbm with
      selection between line in and insert patch point
    * 4 bands independently enabled with +/-15db boost/cut
    * Hi and low bands selectable between peaking and shelving
    * Hi-mid and low-mid bands each have 3 selectable Q positions
    * 3rd order selectable frequency high pass filter
    * Hardwire bypass of equalizer section
    * Internal low-noise shielded power supply (externally selectable
      for 110 / 220 volt; 50 / 60 Hz)



-m@